Organic Sulfur Hydrogenation Catalyst
Features & Scope of Application
CNGM-02 is an organic sulfur hydrogenation conversion catalyst with Co-Mo as the main active ingredient. This catalyst has high conversion ability for complex organic sulfides and can be used for the hydrogenation conversion of organic sulfides in gas-liquid hydrocarbons such as natural gas, oilfield gas, liquefied petroleum gas and naphtha, etc. It is suitable for large and medium scale ammonia plants, methanol plants, hydrogen production and other chemical enterprises. The organic sulfur content in feed hydrocarbons can be reduced to less than 0.1 ppm after hydrogenation conversion by this catalyst, which has the characteristics of high activity and long service life. | ![]() |
Technical Specifications
Chemical Composition
CuO | wt.% | ≥ 2.0 |
MoO3 | wt.% | ≥ 10.0 |
Al2O3 and promoter | wt.% | Balance |
Physical Properties
Appearance | Grayish blue | |
trilobe/quadralobe | ||
extrudate | ||
Particle size | mm | φ 3.0/2.5×(5~20) |
Bulk density | kg/l | 0.65±0.10 |
Average radial crush strength | N/cm | ≥60 |
Attrition rate | % | ≤3.0 |
Operation Conditions
Operating temperature | ppm | 100~200 |
H2/Oil ratio (v/v) | 50~100 | |
Hydrogen in feed gas | %(vol.) | 2~5 |
LHSV | h-1 | 1~6 |
GHSV | h-1 | 500~3000 |
Pressure | MPa | 1.5~5.0 |
Temperature | °C | 250~450 |
Ammonia in hydrogenated gas | ppm | <100 |
Arsenic in feed oil | ppb | <100 |
Indicators
Organic sulfur after treatment | ppm | < 0.1 |
Thiophene conversion rate | % | >99.5 |
(according to national chemical industry standard) | % | ≥ 70 |
Hydrocarbon Hydrogenation Catalyst
Features & Scope of Application
CNNM-01 Hydrocarbon Hydrogenation Catalyst is a new Ni-Mo hydro-desulfurization catalyst with Ti-Al composite support. The catalyst has high hydrogenation conversion ability for organic sulfide, oxygen and organic basic nitrides in feed gas (oil). In particular, it has strong conversion ability for organic sulfide in gas or oil with higher CO2 concentration (such as natural gas, light oil, etc.) It is suitable for the hydro-desulfurization process of feed gas (oil) in large-scale ammonia plants, methanol plants, oil refineries, etc. | ![]() |
Technical Specifications
Chemical Composition
NiO | wt.% | ≥2.0 |
MoO3 | wt.% | ≥10.0 |
Al2O3 and promoter | wt.% | Balance |
Physical Properties
Appearance | Light yellow | |
trilobe /quadralobe extrudate | ||
Particle size | mm | φ3.0/2.5×(5~20) |
Bulk density | kg/l | 0.65±0.10 |
Average radial crush strength | N/cm | ≥60 |
Attrition rate | % | ≤3.0 |
Operation Conditions
Pressure | MPa | 1.5~5.0 |
Temperature | ℃ | 200~450 |
GHSV | h-1 | 1000~3500 |
Organic sulfur in feedstock | ppm | <200 |
H2/Oil ratio (v/v) | 80~200 | |
Hydrogen in feedstock | % | 2~5 (up to feedstock) |
Indicators
Organic sulfur after treatment | ppm | <0.1 |
Organic Sulfur Hydrogenation Catalyst
Features & Scope of Application
CNGM-02 is an organic sulfur hydrogenation conversion catalyst with Co-Mo as the main active ingredient. This catalyst has high conversion ability for complex organic sulfides and can be used for the hydrogenation conversion of organic sulfides in gas-liquid hydrocarbons such as natural gas, oilfield gas, liquefied petroleum gas and naphtha, etc. It is suitable for large and medium scale ammonia plants, methanol plants, hydrogen production and other chemical enterprises. The organic sulfur content in feed hydrocarbons can be reduced to less than 0.1 ppm after hydrogenation conversion by this catalyst, which has the characteristics of high activity and long service life. | ![]() |
Technical Specifications
Chemical Composition
CuO | wt.% | ≥ 2.0 |
MoO3 | wt.% | ≥ 10.0 |
Al2O3 and promoter | wt.% | Balance |
Physical Properties
Appearance | Grayish blue | |
trilobe/quadralobe | ||
extrudate | ||
Particle size | mm | φ 3.0/2.5×(5~20) |
Bulk density | kg/l | 0.65±0.10 |
Average radial crush strength | N/cm | ≥60 |
Attrition rate | % | ≤3.0 |
Operation Conditions
Operating temperature | ppm | 100~200 |
H2/Oil ratio (v/v) | 50~100 | |
Hydrogen in feed gas | %(vol.) | 2~5 |
LHSV | h-1 | 1~6 |
GHSV | h-1 | 500~3000 |
Pressure | MPa | 1.5~5.0 |
Temperature | °C | 250~450 |
Ammonia in hydrogenated gas | ppm | <100 |
Arsenic in feed oil | ppb | <100 |
Indicators
Organic sulfur after treatment | ppm | < 0.1 |
Thiophene conversion rate | % | >99.5 |
(according to national chemical industry standard) | % | ≥ 70 |
Hydrocarbon Hydrogenation Catalyst
Features & Scope of Application
CNNM-01 Hydrocarbon Hydrogenation Catalyst is a new Ni-Mo hydro-desulfurization catalyst with Ti-Al composite support. The catalyst has high hydrogenation conversion ability for organic sulfide, oxygen and organic basic nitrides in feed gas (oil). In particular, it has strong conversion ability for organic sulfide in gas or oil with higher CO2 concentration (such as natural gas, light oil, etc.) It is suitable for the hydro-desulfurization process of feed gas (oil) in large-scale ammonia plants, methanol plants, oil refineries, etc. | ![]() |
Technical Specifications
Chemical Composition
NiO | wt.% | ≥2.0 |
MoO3 | wt.% | ≥10.0 |
Al2O3 and promoter | wt.% | Balance |
Physical Properties
Appearance | Light yellow | |
trilobe /quadralobe extrudate | ||
Particle size | mm | φ3.0/2.5×(5~20) |
Bulk density | kg/l | 0.65±0.10 |
Average radial crush strength | N/cm | ≥60 |
Attrition rate | % | ≤3.0 |
Operation Conditions
Pressure | MPa | 1.5~5.0 |
Temperature | ℃ | 200~450 |
GHSV | h-1 | 1000~3500 |
Organic sulfur in feedstock | ppm | <200 |
H2/Oil ratio (v/v) | 80~200 | |
Hydrogen in feedstock | % | 2~5 (up to feedstock) |
Indicators
Organic sulfur after treatment | ppm | <0.1 |
content is empty!