Introduction
HNKW-Z and HNKW-B series are high performance catalysts for the production of polypropylene. The
catalysts are Ti-Mg based, belonging to Ziegler-Natta 4th generation catalyst. The catalysts are developed and manufactured in China using the state-of-the-art technology.
HNKW-Z and HNKW-B series catalysts have excellent performance in propylene polymerization. These catalysts are designed for use in the different PP production technologies. They show low sensitivities to impurities or poisons contained in the monomers, and thus offer wide operating windows.
HNKW-Z and HNKW-B series also give high activity and high stereoregularity. The polymer particles have good morphology and low fines.
Specification
Catalyst | HNKW-Z series | HNKW-B series |
Morphology | Granular | Spherical |
Average particle size (μm) | 12-25 | 30-65 |
Ti content (%) | 1.8-3.0 | 1.8-3.0 |
Mg content (%) | 16-20 | 16-20 |
Activity (kg Polymer/g Cat.) | 20-35* | 25-45* |
Bulk Density, poured (kg/l) | 0.35 min* | 0.40 min* |
Polymer X.I (%) | 95.0-98.8* | 95.0-98.8 |
Application in process | Spheripol Unipol Novolen Hypol Innovene Slurry | Spheripol Novolen |
Depends on different technologies
Application
HNKW-Z and HNKW-B series catalysts are designed for the production of homo, random and impact polypropylene in the bulk, gas phase and slurry processes.
HNKW-Z is designed as a drop-in catalyst to replace Lynx 1010, GF2A and Shac. HNKW-B is designed as a drop-in catalyst to replace ZN-M1 and Polymax®500.
Packaging
80 kg net weight/steel drum under nitrogen protection or tailor made.
Catalysts For Ethylene Polymerization
HNKW-PES
Introduction
A new generation high-tech products of polyethylene catalyst HNKW-PES has the characteristics of high catalytic efficiency as well as good polymer morphology. The catalyst is designed for the full-density polyethylene production which has good performance and can meet the requirements of end users.
The catalysts are developed and manufactured in China using the state-of-the-art technology.
Specification
Catalyst | HNKW-PES |
Catalyst powder morphology | Spherical |
Appearance (mixed with mineral oil) | Pale yellow liquid |
Average particle size (μm) | 20.0 - 30.0 |
Ti content (%) | 2.0 - 3.0 |
Mg content (%) | 6.5 - 7.0 |
C4H8O content (%) | 25.0 - 35.0 |
THF/Mg(mol/mol) | 1.5 - 1.7 |
Activity (gPE/gCat) | 6000 min. |
Bulk Density, (kg/l) | 0.30 min. |
Application in process | Full-density polyethylene production technologies |
Application
HNKW-PES is designed for the production of full-density polyethylene in the gas phase polyethylene production technologies such as Unipol, Innovene G, etc.
Packaging
360kg per steel cylinder under nitrogen protection; Including 100kg catalyst powder and 260kg white mineral oil.
Introduction
HNKW-Z and HNKW-B series are high performance catalysts for the production of polypropylene. The
catalysts are Ti-Mg based, belonging to Ziegler-Natta 4th generation catalyst. The catalysts are developed and manufactured in China using the state-of-the-art technology.
HNKW-Z and HNKW-B series catalysts have excellent performance in propylene polymerization. These catalysts are designed for use in the different PP production technologies. They show low sensitivities to impurities or poisons contained in the monomers, and thus offer wide operating windows.
HNKW-Z and HNKW-B series also give high activity and high stereoregularity. The polymer particles have good morphology and low fines.
Specification
Catalyst | HNKW-Z series | HNKW-B series |
Morphology | Granular | Spherical |
Average particle size (μm) | 12-25 | 30-65 |
Ti content (%) | 1.8-3.0 | 1.8-3.0 |
Mg content (%) | 16-20 | 16-20 |
Activity (kg Polymer/g Cat.) | 20-35* | 25-45* |
Bulk Density, poured (kg/l) | 0.35 min* | 0.40 min* |
Polymer X.I (%) | 95.0-98.8* | 95.0-98.8 |
Application in process | Spheripol Unipol Novolen Hypol Innovene Slurry | Spheripol Novolen |
Depends on different technologies
Application
HNKW-Z and HNKW-B series catalysts are designed for the production of homo, random and impact polypropylene in the bulk, gas phase and slurry processes.
HNKW-Z is designed as a drop-in catalyst to replace Lynx 1010, GF2A and Shac. HNKW-B is designed as a drop-in catalyst to replace ZN-M1 and Polymax®500.
Packaging
80 kg net weight/steel drum under nitrogen protection or tailor made.
Catalysts For Ethylene Polymerization
HNKW-PES
Introduction
A new generation high-tech products of polyethylene catalyst HNKW-PES has the characteristics of high catalytic efficiency as well as good polymer morphology. The catalyst is designed for the full-density polyethylene production which has good performance and can meet the requirements of end users.
The catalysts are developed and manufactured in China using the state-of-the-art technology.
Specification
Catalyst | HNKW-PES |
Catalyst powder morphology | Spherical |
Appearance (mixed with mineral oil) | Pale yellow liquid |
Average particle size (μm) | 20.0 - 30.0 |
Ti content (%) | 2.0 - 3.0 |
Mg content (%) | 6.5 - 7.0 |
C4H8O content (%) | 25.0 - 35.0 |
THF/Mg(mol/mol) | 1.5 - 1.7 |
Activity (gPE/gCat) | 6000 min. |
Bulk Density, (kg/l) | 0.30 min. |
Application in process | Full-density polyethylene production technologies |
Application
HNKW-PES is designed for the production of full-density polyethylene in the gas phase polyethylene production technologies such as Unipol, Innovene G, etc.
Packaging
360kg per steel cylinder under nitrogen protection; Including 100kg catalyst powder and 260kg white mineral oil.
