Chemical Name Zinc dimethyl dithiocarbamate
Molecular Formula C6H12N2S4Zn
Molecular Weight 305.82
Gravity 1.66
CAS NO. 137-30-4
Chemical Name | Zinc dimethyl dithiocarbamate |
Molecular Formula | C6H12N2S4Zn |
Molecular Structure | |
Molecular Weight | 305.82 |
Gravity | 1.66 |
CAS NO. | 137-30-4 |
Specification
Appearance | Powder | Oil-coated Powder | Granule |
White or Light Yellow | |||
Initial M.P. ℃≥ | 240.0 | 240.0 | 240.0 |
Loss on Drying %≤ | 0.40 | 0.40 | 0.40 |
Ash%≤ | 0.30 | 0.30 | 0.30 |
Residues(150μm) %≤ | 0.10 | 0.10 | -- |
Oil Content % | -- | 1.0-2.0 | -- |
Package | 25kg/bag | ||
Storage Life | 24 months |
Properties No odor, no toxicity. Soluble in lower concentration alkali, CS2, benzene, acetone and CH2Cl2, partly soluble in chloroform, hardly soluble in alcohol, CCl4 and ethyl acetate.
Uses Used for NR, IR, BR, SBR, NBR, HR, EPDM, natural and synthetic latexes. Stronger accelerating power than TMTD, strong resistance to scorching. In its handling, care should be operated, because of its increasing activation and strong tendency to scorch at low temperatures (100℃). Often used as a secondary accelerator. In latex, better results are obtained when used in combination with other types such as thiazole accelerators. Used for rubber coated fabrics, latex products and rubber cement, etc.
Package 25kg/bag
Storage Life 24 months
Chemical Name Zinc dimethyl dithiocarbamate
Molecular Formula C6H12N2S4Zn
Molecular Weight 305.82
Gravity 1.66
CAS NO. 137-30-4
Chemical Name | Zinc dimethyl dithiocarbamate |
Molecular Formula | C6H12N2S4Zn |
Molecular Structure | |
Molecular Weight | 305.82 |
Gravity | 1.66 |
CAS NO. | 137-30-4 |
Specification
Appearance | Powder | Oil-coated Powder | Granule |
White or Light Yellow | |||
Initial M.P. ℃≥ | 240.0 | 240.0 | 240.0 |
Loss on Drying %≤ | 0.40 | 0.40 | 0.40 |
Ash%≤ | 0.30 | 0.30 | 0.30 |
Residues(150μm) %≤ | 0.10 | 0.10 | -- |
Oil Content % | -- | 1.0-2.0 | -- |
Package | 25kg/bag | ||
Storage Life | 24 months |
Properties No odor, no toxicity. Soluble in lower concentration alkali, CS2, benzene, acetone and CH2Cl2, partly soluble in chloroform, hardly soluble in alcohol, CCl4 and ethyl acetate.
Uses Used for NR, IR, BR, SBR, NBR, HR, EPDM, natural and synthetic latexes. Stronger accelerating power than TMTD, strong resistance to scorching. In its handling, care should be operated, because of its increasing activation and strong tendency to scorch at low temperatures (100℃). Often used as a secondary accelerator. In latex, better results are obtained when used in combination with other types such as thiazole accelerators. Used for rubber coated fabrics, latex products and rubber cement, etc.
Package 25kg/bag
Storage Life 24 months
content is empty!